| Romi M-20
Listed For Sale at MachineKs.com in category - CNC Lathes, Flat Bed. |
|
|
| |
|
| 20 Swing 60 Centers Romi M-20 CNC LATHE, Fanuc 21 iT Control,3-Jaw Chuck, | | Ad Id#: | 18834 | | Seller Ref.# | 151434 | | Model: | M-20 | | Make: | Romi | | Year: | 2001 ( Used ) | | Price: | $37,500.00 | | Location: | USA |
| | Ad Status: | CLOSED | | Listed By: | Machinery Values Inc. | | Address: |
401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501
| |
| | Description: |
ROMI CNC/MANUAL FLAT BED LATHE
MODEL M-20/60, S/N: 002-085267-404, NEW: 2001
SPECIFICATIONS:
DISTANCE BETWEEN CENTERS..................... 62.8"
SWING OVER BED............................... 20"
SWING OVER CROSS SLIDE....................... 10"
SWING OVER CARRIAGE WINGS.................... 17.7"
CROSS SLIDE TRAVEL (X-AXIS).................. 11.02"
LONGITUDINAL TRAVEL (Z-AXIS)................. 61.6"
BED WIDTH.................................... 13.39"
SPINDLE NOSE................................. A2-8"
HOLE THROUGH SPINDLE......................... 3.15"
RANGE OF SPINDLE SPEEDS (INF VARIABLE)....... 2 - 2,200 RPM
RAPID TRAVERSE (Z)........................... 394 IPM
RAPID TRAVERSE (X)........................... 295 IPM
TAILSOCK QUILL TRAVEL........................ 5.12"
QUILL DIAMETER............................... 3.15"
QUILL TAPER HOLE............................. 4MT
MAIN MOTOR................................... 15 HP
APPROXIMATE WEIGHT........................... 8,000 LBS
APPROXIMATE FLOOR SPACE ..................... 144"L x 65"W VOLTAGE... 230/3/60, FULL LOAD CURRENT 51 A
EQUIPPED WITH:
- GE-FANUC 21iT CONTROL w/MANAUL GUIDANCE SOFTWARE, TOOL PATH & 3D PART SHAPE GRAPHICS, TEACH MODE, CONVERSATIONAL PROGRAMMING, G CODE PROGRAMMING, BUILT-IN DRO
- 15 HP GE-FANUC VARIABLE SPEED SPINDLE DRIVE
- TURN PARTS MANUALLY OR AUTOMATICALLY
- DUAL ELECTRONIC HANDWHEEL CONTROLS
- "TEACH" 1ST PART, RUN REMAINING PARTS AUTOMATICALLY
- RS 232 PORT
- 10.4" COLOR LCD DISPLAY
- QUICK CHANGE TOOLPOST
- CONSTANT SURFACE SPEED
- INCH/METRIC CONVERSION
- MULTI-START THREADING, THREAD REPAIR
- 12.5" 3-JAW CHUCK
- COOLANT SYSTEM
- AUTOMATIC LUBRICATION SYSTEM
video: http://youtu.be/XsK3IfD6W80
INSPECT UNDER POWER IN OUR NEW JERSEY WAREHOUSE
CONDITION: **** EXCELLENT ****
|
|
|
NOTE: Displayed on page Romi M-20 20 Swing 60 Centers Romi M-20 CNC LATHE, Fanuc 21 iT Control,3-Jaw Chuck, is listed under ID# 18834 by Machinery Values Inc. in category CNC Lathes, Flat Bed. For any additional info regarding this Romi M-20 please contact directly Machinery Values Inc..
|
© MACHINEKS.COM All Rights Reserved
|
|