[ ← GO TO AD ]

Haco PPES 135-12-10


Listed For Sale at MachineKs.com in category - Press Brakes with CNC Back Gauges.
 
[ TRANSLATOR ]
135 Ton 144 Bed Haco PPES 135-12-10 PRESS BRAKE, REBUILT CNC PRESS BRAKE
 Ad Id#: 15360
 Seller Ref.# 147373
 Model: PPES 135-12-10
 Make: Haco
 Year: 2011 ( New )
 Price: $45,950.00
 Location: USA
Ad Status:CLOSED
Listed By:Machinery Values Inc.
 Address: 
401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501
 Description: 


HACO 135 Ton x 12 ?SYNCHROMASTER? CNC HYDRAULIC
PRESS BRAKE
Model: PPES 135-12-10
MFG: 1988 FACTORY REBUILT: 2011 AND NEVER USED
OUR PRICE: $ 45,950.00.
NEW PRICE $ 76,980.00! SAVE 40%! COMPARED TO A
NEW MACHINE EQUIPPED THE SAME:

SPECIFICATIONS
Tonnage . . . . . 135 tons
Capacity . . . . . 135 tons
Overall Bending Length . . . 144
Clear Distance Between Housings . . 124
Maximum Stroke (Programmable). . . 7.8
Throat . . . . . . 9.8
Open Height . . . . . 15.7
H.P. Electric Motor . . . . 20 HP
Voltage . . . . . 220/440 VAC
Rapid Approach Speed . . . 165/min
Maximum Press Speed (Programmable) . 24/min
Rapid Return Speed . . . . 189/min
Length . . . . . . 162
Overall Height . . . . . 98
Front/Back . . . . . 67
Weight . . . . . . 19,400 lbs

Price includes new ATS 590 Graphics 2D Control.
Equipped with quick clamp system tool holders and manual European
bottom holders
Complete new Control & Electrical Box-panel, new cable wiring, resealed
cylinders, rebuild back gauge, fresh oil and filters and fresh paint.
Mfg. Year 1988.

All HACO-ATLANTIC SYNCHROMASTER press brakes are built to conform
to ANSI B11.3 American National Standard for machine tools - power press
brakes - safety requirements for construction, care, and use. The purchaser
shall be responsible for the proper installation and continued use of point of operation
guards and/or awareness barriers to assure required operator safety. Haco- Atlantic,
Inc. recommends to check out your local safety regulations by OSHA. Haco- Atlantic, Inc.
offers optional safety equipment such as two-hand control and light curtains.


HACO-ATLANTIC, Inc., member of the HACO International Group, builds SAFE
machines conforming to ANSI B11.3 ?American National Standard for machine tools -
power press brakes- safety requirements for construction, care and use.? We deliver
our machine with a safety handbook, as well as interfacing capabilities for owner
installed safety devices. Due to the multiple purposes of a press brake, point of
operation guards should be installed by the purchaser in accordance with Federal
Safety Requirements.
Productivity will be increased with a HACO SYNCHROMASTER
Press Brake due to the versatility and easy operation of the machine. The press
brake comes with the upgraded ATS 590 control.
Your company will gain customer confidence from the ACCURACY the
HACO Press Brake gives you. Our synchronized bed referenced linear scale
design guarantees bending accuracy only limited to material differences or tooling
inaccuracies. Most importantly, your machine will be DEPENDABLE. The
machine is built with top quality components.
We are confident that a decision to purchase a PPES Series Press Brake will
be one of your companys wisest business decisions.

CONSTRUCTION
Rugged all steel interlocked and welded construction for maximum strength and
minimum deflection. All frames are stress relieved after welding to provide as near
perfect surfaces as possible, which in turn results in better bends. The all-welded
construction also resists torque twist that is sometimes found in bolt-together
designs. Flush floor mount. No pit or special foundation required.
Precision bed and ram. PPES press brakes use single, deep-sectioned plates for
the bed and ram. The ram is fitted with more punch clamping plates and bolts than
is commonly found on other machines. This enables the operator to easily and
securely clamp small tooling segments if he is not using one long punch. The bed
is an integral part of the machine frame and is machined in one set up in
conjunction
with the ram ways and cylinder mounts. This insures positive alignment
relationships between the ram, bed and frame for guaranteed accuracy.
The bed has a removable table and can be re-machined in the event of
accidental overload damage or eventual wear from the tooling. Crowning to
suit your application is done by our service engineer upon installation of the
machine. The amount of crown can easily be changed if necessary. Manual
controlled crowning tables are offered as an option.
Full length die slot in removable table with set screws.
Large throat gaps in side frames and a unusually clear working space.
Machine comes standard with European System Tool tool holders.
(European (Amada?) style tool holders with built-in wedge system)
The use of non-metallic gibs prevents galling of the bearing surfaces and permits
minimum clearances for accurate ram guidance.
Rotating pendant mounted control.
The cylinders are manufactured by HACO, they used Parker Polypac and wiper
seals. All hydraulic components are mounted on top of the machine free from
debris and dirt. The hydraulic design is easy to service and the machine comes
complete with hydraulic fluid. The hydraulics on the SYNCHROMASTER are
simply, yet accurate and most importantly dependable. The system has a
built-in safety relief valve. If an attempt is made to bend material incapable of
being bent, the machine will automatically open the safety relief valves to release
pressure and prevent machine overloads.
Most hydraulic and electric components are standard industrial/commercial grade,
off-the shelf items from major manufacturers such as Parker?, Vickers?,
Rewrote? or Hoerbigger? hydraulics and Telemecanique? or ABB? electrics.
Movable foot pedal with hand grab, dual foot pedals for ram control. Second foot
pedal and two- hand control are offered as an option.

CONTROL BACK GAUGE UNIT
The machine comes standard with an X-axis. The standard back gauge has the
following features:
- The X-axis comes standard with programmable position and manually
adjustable finger height, finger width.
- The machine comes standard with a 20 high speed back gauge on ball screws.
We use a fast DC servo driven backstop on our machines. The motor uses an
optical encoder to ensure a very high positioning accuracy.
- A steel dovetail gauge bar spans the distance between side frames, allowing
gauge fingers to be positioned manually along its length.
- Two gauge fingers are manually adjustable (4.1/2? in height)to accommodate
different V-die heights. An elevating screw, adjustable with by a hand wheel,
provides accurate height positioning.
- Overtravel of the backstop is avoid by the use of two limit switches and the CNC
control.
- Back gauge X-axis automatically references at the initial startup.
- Retraction is fully programmable. (Wait-Retract)

GENERAL
- Machine can be set for 220 or 440V, 3 phase, 60Hz operation
- Service tools included.
- Oil delivered with the machine.
- One safety, operator and service manual included.
- One year warranty on parts and labor, except tooling. Warranty shall be
considered void if the machine is not used in a normal and proper manner, not
properly maintained, or modified for any special use.
- Installation, start up and training are included.

OPTIONAL EQUIPMENT
29 front support arm with 2 T-slots and 1 tilting stop $ 470.00/each
(Not recommended on system tools, manual or CNC anti deflection tables!)
Additional tilting stop for front support arm $ 90.00/each
Type 1: Adjustable front support system includes: * N/A
- two 29? front support arms with 2 T-slots and 1 tilting stop
- manually adjustable in width along full length of the machine
Extra front support for above Type 1 front support system * N/A
Type 2: Adjustable front support system includes: * N/A
- two 19.5? front support arms with 2 T-slots and 1 tilting stop
- manually adjustable in width along full length of the machine
- manually adjustable in height with hand wheel
Extra front support for above Type 2 front support system * N/A
Second foot pedal in series with standard pedal * $ 1,400.00
Emergency stop button in specified location* $ 390.00
HACO Bend 2D off-line software for ATS 590 and Fast Bend $ 6,250.00
** indicates factory installation only
Two hand control* $ 4,230.00
18? Triad Superlight V, Model TR18-4F-15 Infrared light curtain system $ 3,280
- ?? spaced light beam
- one beam floating blank capacity
Triad swing mount brackets for above, model 9000, price per pair $ 1,110.00
Laser Entry Safe Guarding . . . . . $ 8,950.00
Close loop Air Conditioner for Electrical Enclosure $ 2,600.00
(Recommended for HOT environments)
Extra operators manual $ 80.00

BACK GAUGE OPTIONS
Added price for 39 back gauge in lieu of standard 31 * N/A
Added price for extra finger block $ 1,310.00
Heavy Duty R-Axis available only for ATS 590 and Fastbend controls* N/A
(Not possible with the ATS 570 and ATS 570 control!)

AVAILABLE FOR IMMEDIATE DELIVERY
 


NOTE: Displayed on page Haco PPES 135-12-10 135 Ton 144 Bed Haco PPES 135-12-10 PRESS BRAKE, REBUILT CNC PRESS BRAKE is listed under ID# 15360 by Machinery Values Inc. in category Press Brakes with CNC Back Gauges. For any additional info regarding this Haco PPES 135-12-10 please contact directly Machinery Values Inc..

© MACHINEKS.COM All Rights Reserved