[ ← GO TO AD ]

Birmingham YCL-26120


Listed For Sale at MachineKs.com in category - New Lathes.
 
[ TRANSLATOR ]
26Inch Swing 120Inch Centers Birmingham YCL-26120 ENGINE LATHE, 4-1/8Inch Bore, 15hp
 Ad Id#: 15062
 Seller Ref.# 146562
 Model: YCL-26120
 Make: Birmingham
 Year: ( New )
 Price: $17,150.00
 Location: USA
Ad Status:CLOSED
Listed By:Machinery Values Inc.
 Address: 
401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501
 Description: 
NEW BIRMINGHAM 26Inch x 120Inch HIGH SPEED PRECISION GAP BED LATHE
MODEL:YCL-26120 ** With Free Taper Attachment!! **

SPECIFICATIONS:
Swing over bed: 26Inch
Swing over cross slide: 17-1/4Inch
Swing in gap diameter: 36Inch
Length of gap: 10Inch
Center Height: 13Inch
Distance between centers: 120Inch
Width of bed: 16Inch
Max section of tool: 1Inch x 1Inch
Max travel of cross slide: 14-1/2Inch
Max travel of compound rest: 9Inch
Spindle bore: 4-1/8Inch
Spindle nose: D1-8
Taper of spindle bore: MT5
Spindle speed step: 16
Range of spindle speed: 25-1600 RPM
Leadscrew pitch: 40mm x 2 TPI
Inch threads range: 7/16 ~ 80 TPI
Metric threads range: 0.45 ~ 120mm (54 kinds)
Diametrical pitches range: 7/8 ~ 160 DP (42 kinds)
Module pitches range: 0.25 ~ 60MP (46 kinds)
Cross feeds range in metric lead screw: 0.044 ~ 1.48mm/rev (25 kinds)
Cross feeds range in inch lead screw: 0.00165Inch x 0.05497Inch/rev (25 kinds)
Longitudinal feeds range in metric lead screw: 0.022 - 0.74mm/rev (25 kinds)
Longitudinal feeds range inch lead screw:0.00083Inch - 0.02774Inch/rev (25 kinds)
Travel of tailstock sleeve: 9-1/4Inch
Diameter of tailstock sleeve: 3-1/2Inch
Morse taper of tailstock sleeve: MT#5
Power of main motor: 11 kw (15 hp)
Power of coolant pump: 0.09KW (1/8hp)
Dimensions: 4740 x 1230 x 1840
Weight: 4,300 kgs

STANDARD ACCESSORIES:
3 Jaw Chuck
4 Jaw Chuck
Faceplate
Steady Rest
Follow Rest
Thread Chasing Dial
Oil Gun
Set of wrenches
Drive plate
4-way tool post
Rapid travel
Splash guard
Taper turning attachment

STANDARD FEATURES:
15 HP MAIN MOTOR
ONE-PIECE CAST IRON BASE
NO CHANGE WITH 4Inch BORE
NO CHANGE GEARS REQUIRED
16 SPDS FROM 25-1600 RPM
54 KINDS OF INCH THREADS
54 KINS OF METRIC THREADS
MAIN SPINDLE HARDENED & PRECISION GROUND
BED MADE OF FINE GRAIN HIGH TENSILE CAST IRON
BEDWAYS INDUCTION HARDENED & PRECISION GROUND
ALL GEARS & SHAFTS HARDENED & PRECISION GROUND
MAIN SPINDLE SUPPORTED AT 3-POINT BY PRECISION BEARINGS

OPTIONAL ACCESSORIES: (call for pricing)
2-AXIS NEWALL DRO, INSTALLED



 


NOTE: Displayed on page Birmingham YCL-26120 26Inch Swing 120Inch Centers Birmingham YCL-26120 ENGINE LATHE, 4-1/8Inch Bore, 15hp is listed under ID# 15062 by Machinery Values Inc. in category New Lathes. For any additional info regarding this Birmingham YCL-26120 please contact directly Machinery Values Inc..

© MACHINEKS.COM All Rights Reserved