|
Tschudin HTG-410
Listed For Sale at MachineKs.com in category - Universal Cylindrical Grinders. |
|
|
| |
|
| 8Inch Swing 19Inch Centers Tschudin HTG-410 OD GRINDER, HYD. TABLE, AUTO INFEED, |
| Ad Id#: | 14665 | | Seller Ref.# | 144757 | | Model: | HTG-410 | | Make: | Tschudin | | Year: | 1985 ( Used ) | | Price: | $0.00 | | Location: | USA |
| | Ad Status: | CLOSED | | Listed By: | Machinery Values Inc. | | Address: |
401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501
| |
|
 |
| Description: |
8Inch X 19Inch TSCHUDIN InchSWISSInch SUPER-PRECISION
UNIVERSAL I.D./O.D. CYLINDRICAL GRINDER
MODEL: HTG-410 S/N: 85-1024 NEW: 1985
TABLE:
SWING OVER TABLE ................................. 8Inch
DISTANCE BETWEEN CENTERS ........................ 19Inch
TABLE SPEED ........................... 0 TO 195Inch IPM
SWIVELLING RANGE ...................... +/- 9 DEGREES
WHEELHEAD:
WHEEL SIZE ................... 14InchDIA. X 2InchW X 5InchBORE
SWIVELLING RANGE ...................... +/- 5 DEGREES
MOTOR .......................................... 4 HP
TRAVEL BY USING THE HANDWHEEL .................. 1.8Inch
RAPID APPROACH, AUTOMATICALLY ................ 1-1/2Inch
INFEED-AUTOMATIC ................. 0 TO .050Inch ON DIA.
INFEED SPEED, MAXIMUM ..................... 1.2Inch/MIN.
SPARKOUT ............................ 2 TO 30 SECONDS
WORKHEAD:
SPINDLE TAPER .................................. #5MT
SPINDLE NOSE ................................ M48 X 3
SWIVELLING RANGE ........................ 360 DEGREES
INFINITELY VARIABLE SPINDLE SPEED ..... 65 TO 500 RPM
TAILSTOCK:
TAPER OF CENTER BORE ........................... #3MT
TRAVEL OF CENTER ............................... 0.8Inch
APPROXIMATE MACHINE DIMENSIONS FOR
OPERATION .......................... 8L X 6D X 80InchH
APPROXIMATE WEIGHT .......................... 4,400 LBS
MACHINE FEATURES:
TSCHUDIN HYDRODYNAMIC TYPE CYLINDRICAL BRONZE TO
STEEL BEARING WHEELHEAD DESIGN
SIMPLE ONE-KNOB CONTROL INITIATES ALL THE SETTINGS
FOR TRAVERSE & PLUNGE GRINDING CYCLES
HYDRAULIC OPERATION FEATURING:
-POWER TABLE TRAVERSE
-AUTOMATIC INFEED
-DUAL RATE INFEED .... THIS IS AN OPTION, AND THIS
MACHINE HAS IT.
-RAPID WHEELHEAD ADVANCE AND RETRACTION
SPARKOUT TIMER
DUAL LIVE/DEAD WORKHEAD SPINDLE
EQUIPPED WITH:
SWING DOWN I.D. GRINDING ATTACHMENT WITH I.D. SPINDLE
COOLANT SYSTEM
DIAL INDICATOR FOR TABLE TAPER ADJUSTMENT
TWO 2-POINT STEADY RESTS
SWING BACK DIAMOND WHEEL DRESSER WITH MICROMETER ADJUSTMENT
#5MT ADAPTOR & DRAW BAR
5Inch 4-JAW CHUCK, PLAIN BACK, CURRENTLY MOUNTED ON THE
ADAPTOR PLATE
SPECIAL NOTE:
MACHINE IS WIRED FOR 3/60/575 .... MACHINE WAS PURCHASED
FROM A COMPANY IN CANADA. A TRANSFORMER CAN BE PROVIDED
FOR $600 TO ALLOW THIS MACHINE TO BE USED AT
200-208-220-230-240-440-460-480 VOLTS.
PLEASE SPECIFY YOUR EXACT VOLTAGE REQUIREMENT.
** INSPECT UNDER POWER IN OUR HARRISON, NJ WAREHOUSE **
** BEAUTIFUL CONDITION & APPEARANCE, JUST A LOVELY InchSWISSInch
MACHINE! **
|
|
|
NOTE: Displayed on page Tschudin HTG-410 8Inch Swing 19Inch Centers Tschudin HTG-410 OD GRINDER, HYD. TABLE, AUTO INFEED, is listed under ID# 14665 by Machinery Values Inc. in category Universal Cylindrical Grinders. For any additional info regarding this Tschudin HTG-410 please contact directly Machinery Values Inc..
|
© MACHINEKS.COM All Rights Reserved
|
