[ ← GO TO AD ]

Birmingham YCL-2260


Listed For Sale at MachineKs.com in category - New Lathes.
 
[ TRANSLATOR ]
22Inch Swing 60Inch Centers Birmingham YCL-2260 ENGINE LATHE, 10 HP, 12 Speed, 3-
 Ad Id#: 14191
 Seller Ref.# 139055
 Model: YCL-2260
 Make: Birmingham
 Year: ( New )
 Price: $11,750.00
 Location: USA
Ad Status:CLOSED
Listed By:Machinery Values Inc.
 Address: 
401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501
 Description: 
New Birmingham 22Inch x 60Inch Precision Gap Bed Engine Lathe
Model: YCL-2260



FEATURES:
10 HP MAIN MOTOR
ONE PIECE CAST IRON BASE
D1-8 SPINDLE WITH 3-1/8Inch SPINDLE BORE
NO CHANGE GEARS REQUIRED
12 SPEEDS FROM 45 - 1,600 RPM
60 KINDS OF INCH THREADS FROM 112 - 2 TPI
47 KINDS OF METRIC THREADS FROM 0.2 - 14MM
MAIN SPINDLE HARDENED & PRECISION GROUND
BED MADE OF FINE GRAIN HIGH TENSILE CAST IRON
BEDWAYS INDUCTION HARDENED & PRECISION GROUND
ALL GEARS & SHAFTS HARDENED & PRECISION GROUND
MAIN SPINDLE SUPPORTED AT 3-POINT BY PRECISION BEARINGS

SPECIFICATIONS:
MAX. SWING OVER BED: 22Inch
DISTANCE BETWEEN CENTERS: 60Inch
MAX. EFFECTIVE CUTTING LENGTH: 56Inch
MAX. SWING OVER CROSS SLIDE: 13-3/4Inch
MAX. SWING IN GAP: 31Inch
EFFECTIVE LENGTH IN GAP: 6Inch
WIDTH OF BED: 13-3/4Inch
SPINDLE NOSE: D1-8
DIAMETER OF SPINDLE THRU BORE: 3-1/8Inch
TAPER OF SPINDLE CENTER: MT#7 / MT#5
SPINDLE SPEEDS, 12 STEPS: 25,35,55,80,120,170,235,350,525,700,1100,1600 RPM
LONGITUDINAL FEEDS: 35 KINDS, 0.0022Inch - 0.0612Inch REV.
CROSS FEEDS: 35 KINDS, 0.00048Inch - 0.01354Inch REV.
METRIC THREADS: 47 KINDS, 0.2 - 14MM
INCH THREADS: 60 KINDS, 112 - 2 TPI
MODULE THREADS: 39 KINDS, 0.1 - 7MM
DIAMETRAL PITCH THREADS: 50 KINDS, 4 - 112 DP
MAX. TRAVEL OF CROSS SLIDE: 12-15/16Inch
MAX. TRAVEL OF TOP SLIDE: 5-1/8Inch
4-WAY TOOL POST SIZE: 1Inch X 1Inch
LONGITUDINAL LEADSCREW DIA/PITCH: DIA. 1-5/8Inch / 4 TPI
DIAMETER OF TAILSTOCK QUILL: 3Inch
TAPER OF TAILSTOCK QUILL CENTER: MT#5
MAX. TRAVEL OF TAILSTOCK QUILL: 7Inch
POWER OF MAIN MOTOR: 10 HP, 230/460V/60HZ, 3 PHASE PREWIRED 230V
POWER OF COOLANT PUMP: 1/8 HP, 230/460V/60HZ, 3 PHASE PREWIRED 230V

Standard Equipment:
- FOLLOW REST
- 18Inch FACE PLATE
- 6-1/2Inch STEADY REST W/ROLLERS
- 12Inch 3-JAW CHUCK
- 16Inch 4-JAW CHUCK
- 10Inch DRIVE PLATE
- OPERATION & PARTS MANUAL
- COOLANT SYSTEM
- HAOLGEN WORK LIGHT
- REMOVABLE GAP
- 4-WAY TOOL POST
- THREAD CHASING DIAL
- HAND OIL PUMP FOR WAYS
- (2) DEAD CENTERS
- REDUCING SLEEVE MT7/MT5
- TOOL KIT WITH TOOLS
- 4-POSITION AUTOMATIC KICK-OUT
- LONGITUDINAL CARRIAGE STOP
- FULL LENGTH FOOT BRAKE
- FULL LENGTH SPLASH GUARD

Optional Equipment (call for pricing):
- TAPER ATTACHMENT
- 12Inch STEADY REST WITH ROLLER JAWS
- 5C HAND LEVER TYPE COLLET CLOSER
- DIGITAL READOUT
 


NOTE: Displayed on page Birmingham YCL-2260 22Inch Swing 60Inch Centers Birmingham YCL-2260 ENGINE LATHE, 10 HP, 12 Speed, 3- is listed under ID# 14191 by Machinery Values Inc. in category New Lathes. For any additional info regarding this Birmingham YCL-2260 please contact directly Machinery Values Inc..

© MACHINEKS.COM All Rights Reserved