| Victor 1654DCM
Listed For Sale at MachineKs.com in category - New CNC Mills, VMC. |
|
|
| |
|
| 38Inch X Axis 20Inch Y Axis Victor 1654DCM NEW CNC MILL-VMC, Fanuc 20FA, 5 HP Spi | | Ad Id#: | 13680 | | Seller Ref.# | 135660 | | Model: | 1654DCM | | Make: | Victor | | Year: | ( New ) | | Price: | $62,950.00 | | Location: | USA |
| | Ad Status: | CLOSED | | Listed By: | Machinery Values Inc. | | Address: |
401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501
| |
| | Description: |
NEW VICTOR DIGITAL CONTROL MANUAL/CNC BED MILL
MODEL: 1654DCM-CH (Quill Type head)
MACHINE TYPE DESCRIPTION:
A Multiple Function 3-Axis CNC Mill with Manual Handwheel Operation,
Machine Guidance Operation, Teach-in / Playback CNC Operation, and
Fully Automatic CNC G-code, M-code, T-code, and S-code Functions
SPECIFICATIONS:
Table Size: 16Inch x 54Inch
Machine Travels: 38InchX x 20InchY x 24InchZ
Quill Travel: 6Inch
Spindle to Column: 21Inch
Spindle to Table: 4.5Inch - 28.5Inch
Feed rates: 0.01 ~ 200.0 in/min variable by program input
Rapid traverse: X & Y axis = 400 in/min, Z-axis = 300 in/min
Spindle Taper: #40 NMTB
Spindle Motor: 5.0 HP
Spindle Speeds:
- Low Gear: 0 ~ 560 RPM
- High Gear: 561 ~ 4,500 RPM
Machine Weight: 5,500 lbs.
FEATURES:
- The main machine body is made from Meehanite casting for excellent
vibration damping
- Double wall working table & rigid saddle structure provides
unsurpassed rigidity
- Both side of the saddle are coated with TURCITE B for smooth
operation
- The saddle, slideway, and table are hardened and ground to ensure
long life
- Automatic lubrication system for all ballscrews and sliding ways to
keep high precision of the machine: X-Y axis 20 lube points and Z axis
13 lube points
- Y-axis slideway and ballscrew protected by telescoping steel shield
to keep chips out
- Z-axis ballscrew covered by telescoping spring guard to protect against
chips and dust
- High accuracy C-5 grade ballscrews for X/Y/Z axis (32/40/40mm dia)
- High rigidity one-piece CNC spindle head.
- Air Power Draw bar standard
- Optional ATC System
- Vector Frequency Drive for spindle motor - excellent torque
characteristics at all speeds
- All FANUC system with Fanuc AC brushless servo motors & drives
- Four electronic handwheels for manual or automatic operations
- Hardware overtravel limit switch for all travel directions
- Automatic spindle jog during gear changes makes gear shifts easy
- Halogen work light - Fully integrated to allow for CNC control of
on/off function
- Coolant System - Fully integrated to allow for CNC control of
on/off function
- Table guard w/ front sliding doors
- Dual rear splash guards
- Bottom chip and coolant drip pan
- Set of leveling pads, screws, and nuts
- Set of wrenches for operating machine
- Set of Programming, Operation, and Maintenance manuals
- Full one year parts & labor warranty on machine
- One year warranty on Fanuc 20-FA CNC
CONTROL SPECIFICATIONS:
- Fanuc 20-FA Industry Standard CNC
- Optional control choices: Fanuc 20i-FA, Centroid M-400, Anilam 5300M
- 9 |
|
|
NOTE: Displayed on page Victor 1654DCM 38Inch X Axis 20Inch Y Axis Victor 1654DCM NEW CNC MILL-VMC, Fanuc 20FA, 5 HP Spi is listed under ID# 13680 by Machinery Values Inc. in category New CNC Mills, VMC. For any additional info regarding this Victor 1654DCM please contact directly Machinery Values Inc..
|
© MACHINEKS.COM All Rights Reserved
|
|