|
Willis Bergonzi TR50-1250
Listed For Sale at MachineKs.com in category - New Radial Drills. |
|
|
| |
|
| 50Inch Arm Willis Bergonzi TR50-1250 RADIAL DRILL, 6.5 HP, Hydraulic Clamping |
| Ad Id#: | 13861 | | Seller Ref.# | 136905 | | Model: | Bergonzi TR50-1250 | | Make: | Willis | | Year: | ( New ) | | Price: | $51,900.00 | | Location: | USA |
| | Ad Status: | CLOSED | | Listed By: | Machinery Values Inc. | | Address: |
401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501
| |
|
 |
| Description: |
NEW WILLIS-BERGONZI (ITALY) RADIAL DRILL
MODEL: TR50-1250
FEATURES:
Italian built superior quality radial drill
Independent Hydraulic clamping of head, column and arm - arm
can be raised & lowered without altering spindle alignment
Hardened wear strip on upper arm guide way
Hardened & ground nickel-chrome forged steel gears in head
Forced Lubrication in the drill head
Forged allow steel spindle
Power Downfeed overload device
Multiple disk clutch for fast, smooth spindle starts and reversals
Spindle clutch doubles the spindle speed upon reversal - ideal for tapping
Electromagnetic brake for spindle - stops spindle when control
lever is put in neutral
Motorized arm raising with oil bath for arm raising gearbox
Flood coolant
Convenient operators controls
SPECIFICATIONS:
Capacity for drilling
Steel: 2Inch
Cast Iron: 2.6Inch
Capacity for tapping: 2Inch
Quill diameter: 3.4Inch
Spindle stroke: 11.8Inch
Spindle taper: #5MT
Spindle speeds (RPM): 38-1520 (12)
Spindle feeds (inch/rev): 0.004Inch - 0.022Inch 5 steps
Max distance, spindle center to column: 50Inch
Horiz travel of headstock: 37Inch
Max distance, base to spindle: 54Inch
Vertical travel of arm: 30Inch
Spindle motor: 6.5 hp
Weight: 6200 Lbs
Usable Base Dimensions: 52InchL x 30InchW
|
|
|
NOTE: Displayed on page Willis Bergonzi TR50-1250 50Inch Arm Willis Bergonzi TR50-1250 RADIAL DRILL, 6.5 HP, Hydraulic Clamping is listed under ID# 13861 by Machinery Values Inc. in category New Radial Drills. For any additional info regarding this Willis Bergonzi TR50-1250 please contact directly Machinery Values Inc..
|
© MACHINEKS.COM All Rights Reserved
|
