[ ← GO TO AD ]

Makino S56


Listed For Sale at MachineKs.com in category - Vertical Machining Centers. VMC's.
 
[ TRANSLATOR ]
35.4 X Axis 19.7 Y Axis Makino S56 VERTICAL MACHINING CENTER, Pro 3 CONTR
 Ad Id#: 19588
 Seller Ref.# 153777
 Model: S56
 Make: Makino
 Year: 2005 ( Used )
 Price: $0.00
 Location: USA
Listed By:Machinery Values Inc.
 Address: 
401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501
 Description: 
MAKINO VERTICLE MACHINING CENTER

MODEL:S56 S/N:V8333 YEAR:2005

 

 

SPECS:

X-AXIS TRAVEL:................. 35.4"  (900MM)                                                                           

Y-AXIS TRAVEL:................. 19.7"  (500MM)

Z-AXIS TRAVEL: ................ 17.7"  (450MM)

 

SPINDLE:

SPINDLE NOSE TO TABLE DISTANCE ...... 5.9" - 23.6"  (150 - 600MM )

TABLE WORKING SURFACE ............... 39.4" X 19.7" (1000 X 500MM)

T-SLOT CONFIGURATION ................ 18MM H8 X 5 (QTY) X 100 (PITCH)

 

TABLE:

LOAD CAPACITY ....................... 1,432 LBS.  (650KG)

 

SPINDLE HEAD:

SPINDLE POWER (BUILT-IN MOTOR) ...... 22/18 KW (29.5/24.2 HP)

SPEED RANGE (2 RANGES, ELECTRONIC SWITCHING) ........ 130 ~ 13,000 RPM

SPINDLE TAPER HOLE .................................. 7/24 NO. 40 TAPER

SPINDLE BEARING BORE DIAMETER ....................... 2.76" (70MM)

RIGID TAPPING ....................................... STANDARD

 

FEEDRATE:

RAPID TRAVERSE RATE

X .................................................... 40,000MM (1,575")/MINUTE

Y .................................................... 40,000MM (1,575")/MINUTE

Z .................................................... 40,000MM (1,575")/MINUTE

FEEDRATE ............................................. 40,000MM (1,575")/MINUTE

 

AUTOMATIC TOOL CHANGER:

TOOL CHANGE TYPE ..................................... DOUBLE GRIP SINGLE ARM

NUMBER OF DRIVEN TOOLS ............................... 20

MAXIMUM TOOL DIAMETER X LENGTH ....................... 4.5" X 11.8" (114 X 300MM)

                                                         4.72" X 11.8" ADJ. POT EMPTY (120 X 300MM)

MAXIMUM TOOL WEIGHT .................................. 17.6 LBS. (8KG)

TOOL SELECTION ....................................... RANDOM

TOOL SHANK ........................................... 40 TAPER

 

COOLANT SYSTEM:

FLOW RATE (NOZZLE OUTLET) ............................ 21 GALLONS (80 LITERS)

TANK CAPACITY ........................................ 10,318 BTU/HR (2600 KCAL/HR)

 

 

COOLING CAPACITY ..................................... MACHINE TEMPERATURE
 


NOTE: Displayed on page Makino S56 35.4 X Axis 19.7 Y Axis Makino S56 VERTICAL MACHINING CENTER, Pro 3 CONTR is listed under ID# 19588 by Machinery Values Inc. in category Vertical Machining Centers. VMC's. For any additional info regarding this Makino S56 please contact directly Machinery Values Inc..

© MACHINEKS.COM All Rights Reserved