|
Doosan Puma 240A
Listed For Sale at MachineKs.com in category - CNC Turning Centers - CNC Lathes. |
|
|
| |
|
| 21.7 Swing 17.3 Centers Doosan Puma 240A CNC LATHE, Fanuc 21iTB, Collet C |
| Ad Id#: | 19198 | | Seller Ref.# | 152771 | | Model: | Puma 240A | | Make: | Doosan | | Year: | 2006 ( Used ) | | Price: | $0.00 | | Location: | USA |
| | Ad Status: | CLOSED | | Listed By: | Machinery Values Inc. | | Address: |
401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501
| |
|
 |
| Description: |
DAEWOO/DOOSAN PUMA 240A CNC TURNING CENTER
NEW: 2/2006
SPECIFICATIONS:
SWING OVER BED ................ 21.7"
SWING OVER SADDLE ............. 15.4"
MAX. TURNING DIAMETER ......... 13.8"
MAX. TURNING LENGTH ........... 17.3"
MAX. BAR WORK DIA. ............ 1.75"
X-AXIS TRAVEL ................. 9.5"
Z-AXIS TRAVEL ................. 17.3"
SPINDLE SPEED ................. 6,000 RPM
SPINDLE NOSE .................. A2-5
SPINDLE BORE .................. 2.1"
NO. OF TOOL STATIONS .......... 12
OD TOOL HEIGHT ................ 1.0"
BORING BAR DIAMETER ........... 1.5"
INDEX TIME .................... 0.1 sec.
TAILSTOCK QUILL DIAMETER ...... 3.0"
TAILSTOCK QUILL BORE TAPER .... MT#4
TAILSTOCK QUILL TRAVEL ........ 3.1"
RAPID TRAVERSE RATE X/Z ....... 945/1200 IPM
MAIN MOTOR .................... 15 HP
APPROX. WEIGHT ................ 9,780
EQUIPPED WITH:
- FANUC 21iTB CNC CONTROL
- ROYAL 3J COLLET CHUCK
- TOOLSETTER
- 12 STATION TURRET
- TAILSTOCK
- CHIP CONVEYOR
- ALL AVAILABLE MANUALS
Video:
http://youtu.be/pQkHJpDOiEc |
|
|
NOTE: Displayed on page Doosan Puma 240A 21.7 Swing 17.3 Centers Doosan Puma 240A CNC LATHE, Fanuc 21iTB, Collet C is listed under ID# 19198 by Machinery Values Inc. in category CNC Turning Centers - CNC Lathes. For any additional info regarding this Doosan Puma 240A please contact directly Machinery Values Inc..
|
© MACHINEKS.COM All Rights Reserved
|
