[ ← GO TO AD ]

Doosan Puma MX-3100


Listed For Sale at MachineKs.com in category - CNC Turning Centers - CNC Lathes.
 
[ TRANSLATOR ]
39.37 Swing 60 Centers Doosan Puma MX-3100 CNC LATHE, Fanuc 31i-5A, 15ch
 Ad Id#: 18490
 Seller Ref.# 150269
 Model: Puma MX-3100
 Make: Doosan
 Year: 2012 ( Used )
 Price: $0.00
 Location: USA
Ad Status:CLOSED
Listed By:Machinery Values Inc.
 Address: 
401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501
 Description: 
DOOSAN PUMA MX-3100 MULTI-AXIS CNC TURNING/MILLING CENTER
NEW: 2/2012    ** NEVER CUT A PART **

SPECIFICATIONS
CAPACITY:
Swing over bed                          (1000mm) 39.37
Swing over carriage                     (700mm) 27.56
Maximum bar capacity                    (102mm) 4.0
Maximum turning diameter, main spindle  (760mm) 29.92
Maximum turning length                  (1540mm) 60.63
LEFT SPINDLE:                                                                                                                                      
Chuck size                              (310mm) 12
Spindle speed                           3,000 RPM            
Spindle nose                            A2-11
Left spindle drawtube I.D.              (103mm) 4.055
Spindle bore diameter                   (115mm) 4.52    
AC high torque spindle motor            (30kW) 40 HP      
LEFT SPINDLE C-AXIS:
Minimum programmable angle (degrees)    .001
Rapid traverse rate (RPM)               400
MILLING SPINDLE
Spindle speed                           12,000 RPM
Motor power (15 min. rating)            (22kW) 30 HP
Maximum spindle torque (15% ED)         (118N.m) 87 ft-lbs
Tool index(2,3 or 4 insert multi-tools) 30 deg.
B-axis (tilt) coupling increment        5 deg.
B-axis travel                           240 (+/- 120) deg.
B-axis minimum increment                0.001 deg
BED, SADDLE, & CROSS SLIDE:
X1 (upper) axis travel                  (630mm) 24.8
Z1 (upper) axis travel                  (1585mm) 62.4
Angle of slant bed                      60 degrees
X1 axis rapid traverse rate            (36m/min) 1,417 IPM
Z1 axis rapid traverse rate            (36m/min) 1,417 IPM
X / Z axis ball screw diameter         1.42 / 1.57
TAILSTOCK:
Tailstock quill diameter               (120mm) 4.7
Tailstock quill stroke (programmable)  (120mm) 4.7
Tailstock body stroke (Servo)          (1550mm) 61.0
Tailstock spindle taper (built-in type)MT #5
Y-AXIS:
Y-axis travel                          9.05
Y-axis rapid traverse rate             (36m/min) 1,024 IPM
ATC:
Tool holder type                       CAPTO-C6
Tool storage capacity                  Cam 40                                                                          
Tool selection method                  Fixed  
Tool change time (tool to tool)        1.8
GENERAL:
Floor space                            202 x 103
Net weight                            (14600kg) 32,187 lbs.
Machine height                        119
Voltage required                      205-235 volt/3 phase
Power requirement                     70 kVa (183 amps @ 220 volts)

EQUIPPED WITH:
  - FANUC 31i-5A CNC CONTROL
  - 15 chuck
  - Chip Conveyor

** LESS THAN 100 HOURS OF USE. THIS MACHINE HAS NEVER CUT A PART **
  







 


NOTE: Displayed on page Doosan Puma MX-3100 39.37 Swing 60 Centers Doosan Puma MX-3100 CNC LATHE, Fanuc 31i-5A, 15ch is listed under ID# 18490 by Machinery Values Inc. in category CNC Turning Centers - CNC Lathes. For any additional info regarding this Doosan Puma MX-3100 please contact directly Machinery Values Inc..

© MACHINEKS.COM All Rights Reserved