[ ← GO TO AD ]

Johnford HMC-500H


Listed For Sale at MachineKs.com in category - Horizontal Machining Centers (HMC).
 
[ TRANSLATOR ]
30 X Axis 26 Y Axis Johnford HMC-500H HORZ MACHINING CENTER, Fanuc 18iMB
 Ad Id#: 18423
 Seller Ref.# 149867
 Model: HMC-500H
 Make: Johnford
 Year: 2007 ( Used )
 Price: $139,500.00
 Location: USA
Listed By:Machinery Values Inc.
 Address: 
401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501
 Description: 
JOHNFORD HMC-500H HORIZONTAL MACHINING CENTER

MFG: 2007   INSTALLED NEW 2008  S/N: VJA7020

  

  X-Axis Travel............................. 30"

  Y-Axis Travel............................. 26"

  Z-Axis Travel............................. 26"

  Spindle Center to Table Top............... 2" to 28"

  Spindle Nose to Table Center.............. 5.9" to 31.9"

  Table Working Surface (2 Pallets)......... 19.7" x 24.8"

  Table Load Max............................ 1,210 Lbs  

  Table Indexing (Full 4th Axis)............ 0.001 Degrees  

  Spindle Motor............................. 30 HP  

  Spindle Taper............................. CAT-50  

  Spindle Speed (Direct Drive).............. 10,000 RPM  

  Atuomatic Tool Changer.................... 60 Positions  

  Tool Type................................. CAT 50

  Cutting Feed.............................. 0.04 to 591 IPM  

  Rapid Traverse X,Y,Z...................... 1,575 IPM  

  Approx Machine Weight..................... 25,300 lbs  

  Approx Machine Dimensions.....225" x 122" x 124" Tall

  

  Equipped With:

  * Fanuc 18iMB Control

  * Full 4th Axis 0.001 Degree Indexing

  * 2 Pallet Automatic Pallet System

  * Preped for 1,000 PSI Coolant Thru The Spindle

  * Chip Conveyors (screw type)

  * Chip Conveyor (caterpillar type)

  * Coolant Shower System

  * Spindle Oil Cooling System

  * Rigid Tapping

 

 

 

 
 


NOTE: Displayed on page Johnford HMC-500H 30 X Axis 26 Y Axis Johnford HMC-500H HORZ MACHINING CENTER, Fanuc 18iMB is listed under ID# 18423 by Machinery Values Inc. in category Horizontal Machining Centers (HMC). For any additional info regarding this Johnford HMC-500H please contact directly Machinery Values Inc..

© MACHINEKS.COM All Rights Reserved