[ ← GO TO AD ]

GMC GT-2040


Listed For Sale at MachineKs.com in category - New Lathes.
 
[ TRANSLATOR ]
20 Swing 40 Centers GMC GT-2040 ENGINE LATHE, 4-1/8 Bore, 12spd, 10hp
 Ad Id#: 18401
 Seller Ref.# 149712
 Model: GT-2040
 Make: GMC
 Year: ( New )
 Price: $14,850.00
 Location: USA
Listed By:Machinery Values Inc.
 Address: 
401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501
 Description: 
NEW "GMC" 20" x 40" HEAVY DUTY PRECISION GAP BED LATHEMODEL: GT-2040   FEATURES: ISO 9001 certifiedLarge spindle bore 4-1/8"Adjustable mechanical spindle clutch for spindle start forward/reverse and brake4-way rapid traverse on longitudinal and cross waysAll dual inch/metric dialsSolid cast iron machine baseHeavy duty guideway width 15-1/2"Heavy duty main motor 10 HP12 spindle speeds from 36-1,600 rpmThreading and feeding rate change without changing gearsAutomatic kick-out longitudinal carriage stop systemOil pump on apron for lubrication to all ways and leadscrewsSpindle is balanced, hardened, and precision groundSpindle is supported at 3-point by high precision bearingsAll gears and shafts are hardened and precision groundGuideways induction hardened and precision groundAutomatic lubrication system in headstock and feed boxOne year warranty for parts  SPECIFICATIONS: Max. Swing over bed:  20"Max. Length of workpiece:  40"Max. Swing over cross slide:  12"Max. Swing in gap:  28"Width of bed:  15-1/2"Effective length in gap to spindle:  9"Effective length in gap to chuck jaws:  6"Spindle bore:  D1-8, 4-1/8"Taper of spindle center:  M.T.#6Spindle speeds:  36-1,600 rpm, 12 stepsLongitudinal feeds:  0.0023-0.093 IPR, 65 kindsCross feeds:  0.0011-0.04 IPR, 65 kindsInch threads:  28-2 TPI, 25 kindsMetric threads:  1-14 mm, 22 kindsModule threads:  0.5-7 mm, 18 kindsDiameter pitch threads:  56-4 DP, 24 kindsMax. Travel of top slide:  5-3/4"Max. Travel of cross slide:  12-1/2"Longitudinal rapid traverse:  18 ft/min.Cross rapid traverse:  8 ft/min.Diameter of tailstock quill:  3"Max. Travel of tailstock quill:  6"Taper of tailstock quill center:  M.T.#54-way tool post size: 1" x 1"Longitudinal leadscrew diameter/pitch:  diameter: 3", pitch: 2 TPIMain motor:  10 HP, 220V/440V, 3 phase, prewired on 220VRapid traverse motor:  1/3 HP, 220V/440V, 3 phase, prewired on 220VCoolant pump motor:  1/8 HP, 220V/440V, 3 phase, prewired on 220VMachine weight, approx.:  7,650 lbs.Overall dimensions (LxWxH):  86" x 43" x 63"  STANDARD EQUIPMENT: Free taper turning attachment, installedSpindle clutch4-way rapid traverse on carriage and cross slide12" 3-jaw chuck with top reversible jaws16" 4-jaw chuck with top reversible jaws25" face plate10" drive plate4-3/4" to 10-1/4" large steady rest with roller jaws1"-3" follow restAutomatic kick-out longitudinal carriage stop systemOil pump on apron for lubrication to all ways and leadscrewsRemovable gap4-way tool postFoot brakeHalogen work lightCoolant systemFull length splash guard(2) dead centers and (1) reducing sleeveThread chasing dialTool box   OPTIONAL EQUIPMENT (CALL FOR PRICING): 3/4"-5" steady rest with brass tipsLeveling padNEWALL DRO, 2 axis, free installSINO DRO, 0.0001" res., free install5-C hand lever type collet closer, free install33 pc 5C collet set, from 1/16 to 1-1/16" by 32ndth6 pc ALORIS type quick change tool postLive center for tailstock MT#55 pc indexable carbide turning set3/8" carbide insert    


NOTE: Displayed on page GMC GT-2040 20 Swing 40 Centers GMC GT-2040 ENGINE LATHE, 4-1/8 Bore, 12spd, 10hp is listed under ID# 18401 by Machinery Values Inc. in category New Lathes. For any additional info regarding this GMC GT-2040 please contact directly Machinery Values Inc..

© MACHINEKS.COM All Rights Reserved