[ ← GO TO AD ]

GMC GML-4080H


Listed For Sale at MachineKs.com in category - New Lathes.
 
[ TRANSLATOR ]
40 Swing 80 Centers GMC GML-4080H ENGINE LATHE, 5-1/8 large spindle bore
 Ad Id#: 18376
 Seller Ref.# 149586
 Model: GML-4080H
 Make: GMC
 Year: ( New )
 Price: $47,950.00
 Location: USA
Listed By:Machinery Values Inc.
 Address: 
401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501
 Description: 
NEW GMC HEAVY DUTY GAP BED LATHE
MODEL:  GML-4080H



STANDARD FEATURES:
-ISO 9001 certified
-Large spindle bore 5-1/8
-Heavy duty spindle D1-11
-Heavy duty guideway width 24
-Heavy duty main motor 20 hp
-18 spindle speeds from 10 to 800 rpm
-31 kinds of inch threads, and 53 kinds of metric threads
-Threading and feeding rate change without changing gears
-4-way rapid traverse to carriage and cross slide
-Spindle is balanced, hardened and precision ground
-Spindle is supported at 2-point by high precision bearings
-All gears and shafts are hardened and precision ground
-Guideways induction hardened and precision ground
-Automatic lubrication system in headstock and feed box
-Adjustable hydraulic clutch for spindle turning and brake
-Power 220V/208V, 3 phase, 60 HZ (440V/460V is optional)
-One year industrial warranty for parts


SPECIFICATIONS:
-Max. swing over bed:  40-9/16
-Max. length of workpiece:  80
-Max. swing over cross slide:  27-9/16
-Max. swing in gap:  47-1/4
-Width of bed:  24
-Effective length in gap to spindle:  15
-Effective length in gap to chuck:  9
-Spindle bore:  5-1/8, D1-11
-Taper of spindle center:  M.T.#5
-Spindle speeds:  10-800 rpm/ 18 steps
-Longitudinal feeds:  0.0027-0.66 IPR, 64 kinds
-Cross feeds:  0.00157-0.378 IPR, 64 kinds
-Inch threads:  32-2TPI, 31 kinds
-Metric threads:  1-240 mm, 53 kinds
-Module threads:  0.25-60 mm, 47 kinds
-Diametral pitch threads:  60-1/2 DP, 47 kinds
-Max. travel of top slide:  8-7/8
-Max. travel of cross slide:  24-3/16
-Longitudinal rapid travel speed:  126/min.
-Cross slide rapid travel speed:  75/min.
-Diameter of tailstock quill:  4-3/4
-Max. travel of tailstock quill:  10-5/8
-Taper of tailstock quill center:  M.T.#6

-Main motor:  20 hp, 220V or 440V, 3 phase, prewired on 220V
-Rapid traverse motor:  2 hp, 220V or 440V, 3 phase, prewired on 220V
-Coolant pump motor:  1/8 hp, 220V or 440V, 3 phase, prewired on 220V

-Machine weight, approx.:  14,600 lbs.
-Overall dimensions, LxWxH:  171 x 67 x 78


STANDARD EQUIPMENT:
-20 3-jaw chuck with top reversible jaws
-25 4-jaw chuck with top reversible jaws
-31-1/2 face plate
-12 drive plate
-20 large steady rest
-Follow rest
-Removable gap
-4-way tool post
-Foot brake
-Work light and coolant system
-Section splash guard on rear of carriage
-(2) dead centers and (1) reducing sleeve
-Thread chasing dial
-4-way rapid traverse on carriage
-Tool box


OPTIONAL EQUIPMENT (call for pricing):
-Taper attachment, 30 travel, # TA-40H
-DRO, SINO, #SINO-2080, 2 axis
-DRO, NEWALL, #NW2080, 2 axis




 


NOTE: Displayed on page GMC GML-4080H 40 Swing 80 Centers GMC GML-4080H ENGINE LATHE, 5-1/8 large spindle bore is listed under ID# 18376 by Machinery Values Inc. in category New Lathes. For any additional info regarding this GMC GML-4080H please contact directly Machinery Values Inc..

© MACHINEKS.COM All Rights Reserved