[ ← GO TO AD ]

Clausing A40


Listed For Sale at MachineKs.com in category - New Drill Presses.
 
[ TRANSLATOR ]
30.3 Swing 3HP Spindle Clausing A40 DRILL PRESS
 Ad Id#: 18132
 Seller Ref.# 148513
 Model: A40
 Make: Clausing
 Year: ( New )
 Price: $18,795.00
 Location: USA
Listed By:Machinery Values Inc.
 Address: 
401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501
 Description: 
NEW CLAUSING/IBARMIA GEARED-DRIVE ROUND-COLUMN DRILL
30.3 GEARED-HEAD, MECHANICAL CLUTCH, FLOOR
MODEL: A40



SPECIFICATIONS:

Spindle taper:  4MT
Quill diameter:  3.46
Spindle travel (drilling depth):  7.87
Main motor power:  3 HP
Coolant pump motor power:  .1 HP
Number of speeds:  9
Number of automatic feeds:  4
Auto feed range: in/rev.  .0039/.0079/.0118/.0157


STANDARD FEATURES & EQUIPMENT:

-Maximum drilling capacity in steel:  1.57
-Maximum drilling capacity in cast iron:  2.17
-Maximum tapping capacity in steel:  1.3
-Maximum tapping capacity in cast iron:  1.57
-Automatic feed and cut-off by mechanical clutch
-Hardened and ground high quality steel gears
-Speed plate and selecting levers on front of head
-Gear box lubrication by automatic pump
-Machine base with 2 T-slots, coolant tank and pump
-Large worktable with 3 T-slots
-Feed crank wheel for manual feed
-Front hand wheel for fine feed work
-Depth scale and adjustable depth stop
-Automatic tool ejector
-Work light
-Built-in low voltage electrical equipment in machine head
-Emergency STOP
-Drill guard with microswitch


DIMENSIONS:

Height:  92.4
Base: length x width:  31.9 x 21.3
Base to spindle:  49.61
Spindle center to column:  15.16
Spindle to Table:
    Minimum:  5.51
    Maximum:  30.71
Worktable: length x width:  18.9 x 22.1
Base height:  5.31
Column diameter:  7.09


OPTIONAL EQUIPMENT (CALL FOR PRICING):

-Separate Tank Coolant System
-Work Light--Magnetic Base
-Cross Table 19.6 x 9.8
-Cross Table 27.5 x 9.8
-Cycle Start Foot Pedal
-Foot Pedal For Reversing
-Pitch Control Tapping w/Braking System*
-Master Guide Spindle w/Nuts*
-Master Guide Spindle w/Nuts Special Thread (inch etc.)*
-50% Lower Feed Range*
-Mechanical Spot Face Device*
-Pneumatic Counter Balance*
-Union for Multi-Spindle Head*
-Multi-Spindle Head Guide Rod*
-7.8 Column Riser*
-Motor, 1200 RPM*
-Motor, 3600 RPM*
-Motor, 900/1800 RPM*
-Motor, 1800/3600 RPM*

*Factory Installed


WARRANTY:

Clausing warrantees the machine and control for a period of one year from the date of installation. This warranty does not
cover normal wear items such as filters and belts or damage that results from the misuse or abuse of this equipment.

**Due to continual improvements, prices and specifications subject to change without notice**




 


NOTE: Displayed on page Clausing A40 30.3 Swing 3HP Spindle Clausing A40 DRILL PRESS is listed under ID# 18132 by Machinery Values Inc. in category New Drill Presses. For any additional info regarding this Clausing A40 please contact directly Machinery Values Inc..

© MACHINEKS.COM All Rights Reserved