[ ← GO TO AD ]

K.O. Lee B6062H


Listed For Sale at MachineKs.com in category - Tool & Cutter Grinders.
 
[ TRANSLATOR ]
K.O. Lee B6062H TOOL & CUTTER GRINDER, DAKOTA SERIES, TILTING WHEELHEAD, HY
 Ad Id#: 18052
 Seller Ref.# 148281
 Model: B6062H
 Make: K.O. Lee
 Year: 1993 ( Used )
 Price: $0.00
 Location: USA
Listed By:Machinery Values Inc.
 Address: 
401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501
 Description: 
K.O. LEE DAKOTA SERIES
UNIVERSAL TOOL & CUTTER GRINDER

MODEL: B6062H       S/N: 23133-RC    NEW: 1993

  SWING OVER TABLE ........................... 12-1/4
DISTANCE BETWEEN TAILSTOCKS ..................... 32
TABLE WORKING SURFACE .............. 5-1/4 X 37-1/4
SUB TABLE .................................. 8 X 48
LONGITUDINAL TABLE TRAVERSE ..................... 20
TABLE FEED PER REV. OF HANDWHEEL:
FAST ....................................... 2-13/16
SLOW .......................................... 9/16
CROSS FEED ....................................... 8
FEED PER REV. OF HANDWHEEL (.001 GRAD.) ,,... 0.100
VERTICAL MOVEMENT OF COLUMN ................. 10-1/2
FEED PER REV. OF HANDWHEEL (.001 GRAD.)...... 0.050
COLUMN DIAMETER .................................. 6
MINIMUM/MAXIMUM DISTANCE CENTERLINE OF WHEEL
SHAFT TO TABLE ......................5-3/8 / 15-1/4
MAXIMUM DISTANCE FROM COLUMN TO OUTSIDE
  OF STRAIGHT WHEEL; DOVETAIL SLIDE NOT EXTENDED,
  SPINDLE 90 DEG. TO TABLE .................... 6-3/8
MAXIMUM DISTANCE FROM COLUMN TO OUTSIDE
  OF STRAIGHT WHEEL; DOVETAIL SLIDE EXTENDED,
  SPINDLE 90 DEGREES TO TABLE ................ 11-1/2
TABLE SWIVELS (CALIBRATION: 3 PER FT.,
  15 DEG. EITHER SIDE OF CENTER) .......... 225 DEGREES
WHEEL HEAD SWIVEL ........................ 360 DEGREES
MAXIMUM I.D. DEPTH, HOLE SIZE 9/32 TO 2 ..... 3-1/2
MAXIMUM CROSS FEED SURFACE GRINDING W/8 WHEEL..... 5
SPINDLE SPEED RANGE
(HEAVY DUTY WHEELHEAD) .............. 2840 TO 5330 RPM
APPROXIMATE MACHINE WEIGHT ................. 1,300 LBS

  EQUIPPED WITH:
HYDRAULIC TABLE
FRONT & REAR HANDWHEELS FOR TABLE TRAVERSE
DAKOTA HEAVY DUTY #B6055HD UNIVERSAL GRINDING
WHEELHEAD FEATURES:
- SWIVELLING & TILTING (22 DEG. EITHER SIDE
OF VERTICAL)
- 1 HP MOTOR WIRED FOR 3/60/220-440 VOLT OPERATION
- 3-1/2 TO 8 DIAMETER WHEELS
BIJUR LUBRICATOR (ONE-SHOT)

K.O. LEE MOTORIZED WORKHEAD WITH #50 NST TAPER
MINARIK ELECTRONIC VARIABLE SPEED CONTROL

AVAILABLE FOR PURCHASE WITH THIS MACHINE:
K.O. LEE MODEL #BA986 RADIUS GRINDING ATTACHMENT, COMPLETE
  WITH K.O. LEE B942 NON-MOTORIZED SENSITIVE
  WORKHEAD.  PRICE FOR THIS UNIT IS $1,950.

  ** EXCELLENT CONDITION & APPEARANCE **
** INSPECT UNDER POWER IN OUR HARRISON, NJ WAREHOUSE **





 


NOTE: Displayed on page K.O. Lee B6062H K.O. Lee B6062H TOOL & CUTTER GRINDER, DAKOTA SERIES, TILTING WHEELHEAD, HY is listed under ID# 18052 by Machinery Values Inc. in category Tool & Cutter Grinders. For any additional info regarding this K.O. Lee B6062H please contact directly Machinery Values Inc..

© MACHINEKS.COM All Rights Reserved