[ ← GO TO AD ]

GMC GT-26120


Listed For Sale at MachineKs.com in category - New Lathes.
 
[ TRANSLATOR ]
26 Swing 120 Centers GMC GT-26120 ENGINE LATHE, 4-1/8 Bore, 12spd, 15hp
 Ad Id#: 17873
 Seller Ref.# 146572
 Model: GT-26120
 Make: GMC
 Year: ( New )
 Price: $20,950.00
 Location: USA
Listed By:Machinery Values Inc.
 Address: 
401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501
 Description: 
NEW "GMC" 26" x 120" HEAVY DUTY PRECISION GAP BED LATHEMODEL: GT-26120   FEATURES: ISO 9001 certifiedLarge spindle bore 4-1/8"Adjustable mechanical spindle clutch for spindle start forward/reverse and brake4-way rapid traverse on longitudinal and cross waysAll dual inch/metric dialsSolid cast iron machine baseHeavy duty guideway width 15-1/2"Heavy duty main motor 15 HP12 spindle speeds from 36-1,600 rpmThreading and feeding rate change without changing gearsOil pump on apron for lubrication to all ways and leadscrewsSpindle is balanced, hardened, and precision groundSpindle is supported at 3-point by high precision bearingsAll gears and shafts are hardened and precision groundGuideways induction hardened and precision groundAutomatic lubrication system in headstock and feed boxOne year warranty for parts  SPECIFICATIONS: Max. Swing over bed:  26"Max. Length of workpiece:  80"Max. Swing over cross slide:  16-1/2"Max. Swing in gap:  34-1/4"Width of bed:  15-1/2"Effective length in gap to spindle:  9"Effective length in gap to chuck jaws:  6"Spindle bore:  D1-8, 4-1/8"Taper of spindle center:  M.T.#6Spindle speeds:  36-1,600 rpm, 12 stepsLongitudinal feeds:  0.0023-0.093 IPR, 65 kindsCross feeds:  0.0011-0.04 IPR, 65 kindsInch threads:  28-2 TPI, 27 kindsMetric threads:  1-14 mm, 22 kindsModule threads:  0.5-7 mm, 18 kindsDiameter pitch threads:  56-4 DP, 24 kindsMax. Travel of top slide:  5-3/4"Max. Travel of cross slide:  14"Longitudinal rapid traverse:  18 ft/min.Cross rapid traverse:  8 ft/min.Diameter of tailstock quill:  3"Max. Travel of tailstock quill:  6"Taper of tailstock quill center:  M.T.#54-way tool post size: 1" x 1"Longitudinal leadscrew diameter/pitch:  diameter: 3", pitch: 2 TPIMain motor:  15 HP, 220V/440V, 3 phase, prewired on 220VRapid traverse motor:  1/3 HP, 220V/440V, 3 phase, prewired on 220VCoolant pump motor:  1/8 HP, 220V/440V, 3 phase, prewired on 220VMachine weight, approx.:  9,350 lbs.Overall dimensions (LxWxH):  182" x 45" x 66"  STANDARD EQUIPMENT: Free taper turning attachment, installed12" 3-jaw chuck with top reversible jaws20" 4-jaw chuck with top reversible jaws25" face plate10" drive plate4-3/4" to 10-1/4" large steady rest1"-3" follow restRemovable gap4-way tool postFoot brakeHalogen work lightCoolant systemOil pump on apron for lubrication to all ways and leadscrewsSection splash guard on apron(2) dead centers and (1) reducing sleeveThread chasing dialTool box   OPTIONAL EQUIPMENT (CALL FOR PRICING): Full length splash guardNEWALL DRO, 2 axis, free installSINO DRO, 0.0001" res., free installLeveling pad3/4"-5" small steady rest with roller jaws10"-16" large steady rest with brass tips5-C hand lever type collet closer, free install33 pc 5C collet set, from 1/16 to 1-1/16" by 32ndthLive center for tailstock MT#55 pc indexable carbide turning set3/8" carbide insert    


NOTE: Displayed on page GMC GT-26120 26 Swing 120 Centers GMC GT-26120 ENGINE LATHE, 4-1/8 Bore, 12spd, 15hp is listed under ID# 17873 by Machinery Values Inc. in category New Lathes. For any additional info regarding this GMC GT-26120 please contact directly Machinery Values Inc..

© MACHINEKS.COM All Rights Reserved