[ ← GO TO AD ]

Victor 1654DCM

Listed For Sale at MachineKs.com in category - New CNC Mills, VMC.

[ TRANSLATOR ]

38 X Axis 20 Y Axis Victor 1654DCM NEW CNC MILL-VMC, Fanuc 20FA, 5 HP Spi

Ad Id#:	17316
Seller Ref.#	135660
Model:	1654DCM
Make:	Victor
Year:	( New )
Price:	$62,950.00
Location:	USA

Listed By:

Machinery Values Inc.

Address:

401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501

Description:

NEW VICTOR 16 X 54 DIGITAL CONTROL BED MILL MODEL: 1654DCM-CH (Quill Type head) FANUC 3-Axis CNC * MADE IN TAIWAN * MACHINE TYPE DESCRIPTION: A Multiple Function 3-Axis CNC Mill with Manual Handwheel Operation, Machine Guidance Operation, Teach-in / Playback CNC Operation, and Fully Automatic CNC G-code, M-code, T-code, and S-code Functions SPECIFICATIONS: Table Size: 16 x 54 Machine Travels: 38X x 20Y x 24Z Quill Travel: 6 Spindle to Column: 21 Spindle to Table: 4.5 - 28.5 Feed rates: 0.01 ~ 200.0 in/min variable by program input Rapid traverse: X & Y axis = 400 in/min, Z-axis = 300 in/min Spindle Taper: #40 NMTB Spindle Motor: 5.0 HP Spindle Speeds: - Low Gear: 0 ~ 560 RPM - High Gear: 561 ~ 4,500 RPM Machine Weight: 5,500 lbs. FEATURES: - The main machine body is made from Meehanite casting for excellent vibration damping - Double wall working table & rigid saddle structure provides unsurpassed rigidity - Both side of the saddle are coated with TURCITE B for smooth operation - The saddle, slideway, and table are hardened and ground to ensure long life - Automatic lubrication system for all ballscrews and sliding ways to keep high precision of the machine: X-Y axis 20 lube points and Z axis 13 lube points - Y-axis slideway and ballscrew protected by telescoping steel shield to keep chips out - Z-axis ballscrew covered by telescoping spring guard to protect against chips and dust - High accuracy C-5 grade ballscrews for X/Y/Z axis (32/40/40mm dia) - High rigidity one-piece CNC spindle head. - Air Power Draw bar standard - Optional ATC System - Vector Frequency Drive for spindle motor - excellent torque characteristics at all speeds - All FANUC system with Fanuc AC brushless servo motors & drives - Four electronic handwheels for manual or automatic operations - Hardware overtravel limit switch for all travel directions - Automatic spindle jog during gear changes makes gear shifts easy - Halogen work light - Fully integrated to allow for CNC control of on/off function - Coolant System - Fully integrated to allow for CNC control of on/off function - Table guard w/ front sliding doors - Dual rear splash guards - Bottom chip and coolant drip pan - Set of leveling pads, screws, and nuts - Set of wrenches for operating machine - Set of Programming, Operation, and Maintenance manuals - Full one year parts & labor warranty on machine - One year warranty on Fanuc 20-FA CNC CONTROL SPECIFICATIONS: - Fanuc 20-FA Industry Standard CNC - Optional control choices: Fanuc 20i-FA, Centroid M-400, Anilam 5300M - 9 monochrome monitor & 44 key keypad - 3-axis (X ,Y, & Z) digital readout screen - Simultaneous 3-axis interpolation - Manual operation via four (4) handwheels - Machine guidance operation via handwheels - Conversational graphics programming - Teach-in / Playback operation: manually run 1st part, then Playback for automatic operation - Automatic generation of G-code from Geometry data during teach in operation - Simultaneous multiple M-code processing (Up to 3 M-codes) - 6 CNC Modes: MEM, EDIT, MDI, Machine Guidance, Manual/handwheel, Ref Return - 8 Auxiliary CNC Modes: Dry Run, Single Block, Optional Blk Skip, Z-Axis Cancel, Aux. Function Lock, X-Axis Mirror Image, Y-Axis Mirror Image, Manual Handle Interrupt - Manual Interrupt of automatic operations: Handwheel Interrupt and Spindle Interrupt - Diameter / Radius programming - Absolute and incremental programming - Inch / Metric input and display - On-line calculator function to aid in data input - On-line help pages to aid you in the CNC operation - On screen tool path graphics to verify part program - User programmable Software Travel limits to limit the travel for X , Y& Z axes - Intelligent hardware travel limits - only stops movement in the over-traveled direction - Inch / Metric feed rate input: inch/min or mm/min - Gear indicator lights on status panel - Auto spindle jog during gear changes - Spindle load meter: 0% - 180% of rated load - Supervisor key lock switch for disabling parameter and program modification - Conveniently mounted machine Control Panel - E-Stop, Playback, Start, Stop - Aux. Functions on Control Panel: work lamp and coolant - Spindle control on Control Panel: forward, reverse, stop, & speed dial - User selectable Jog / Feedrate override profiles: Linear or Exponential - Auto/Jog feedrate override: 0% to 200% - Spindle override: 50% to 150% - Rapid Traverse override: 12.5%, 25%, 50%, & 100% - Incremental / continuous jog for X, Y, & Z axes - Intelligent Bi-directional home search for X ,Y, & Z axes - Multiplier switch for handwheel sensitivity: 0.0001, 0.001, & 0.01 - CNC RUN VERIFY by Joystick or handwheel for all automatic operations - Easy one touch X, Y, & Z Part Coordinate System setting - Full CNC control of coolant on-off functions via M-codes - Full CNC control of work light on-off functions via M-codes - Three coordinate systems: Machine, Absolute, & Relative - Program storage 63 part program storage - Scaling, Rotation, and Mirror functions - Run-Timer / Parts Counter function - Backlash error compensation - Ballscrew pitch error compensation (for Laser Calibration) - Single direction positioning (optional) - Helical interpolation (optional) - Background Program Editing (optional) - Rigid Tapping (Available on CNC rigid head model only) (optional) - Spindle Orientation (optional) - Custom Macro B programming language (optional) - Built-in RS-232 port for loading/unloading of part programs and other CNC data - 32 Tool length offsets & diameter offset data locations (64 offset data locations optional) - Self diagnostics with error messages on screen STANDARD ACCESSORIES: - Table Guard w/ Front Sliding Door - Rear Splash Guard - Bottom Coolant & Chip Tray - Built-in flood coolant system - Halogen Work Lamp - Metallic slideway and ballscrew covers - Air power draw bar - Quadruple (4) electronic handwheels - Variable speed head (CNC controlled) - Run-Timer / Parts Counter AVAILABLE OPTIONS AND ACCESSORIES (call for pricing): - 6 Angle-lock machine vise - 8 Angle-lock machine vise - 10 Horizontal / Vertical Manual rotary table - 12 Horizontal / Vertical Manual rotary table - 14 Horizontal / Vertical Manual rotary table - Clamping kits - Boring head, shank & set of boring bars - Remote control pendant handwheel (X, Y, Z, & MG Axis) - SMW RT-160 CNC Rotary Table (

NOTE: Displayed on page Victor 1654DCM 38 X Axis 20 Y Axis Victor 1654DCM NEW CNC MILL-VMC, Fanuc 20FA, 5 HP Spi is listed under ID# 17316 by Machinery Values Inc. in category New CNC Mills, VMC. For any additional info regarding this Victor 1654DCM please contact directly Machinery Values Inc..