[ ← GO TO AD ]

4500 WATT MITSUBISHI 3015LVP


Listed For Sale at MachineKs.com in category - Other Metalworking Machinery.
 
[ TRANSLATOR ]
4500 WATT MITSUBISHI 3015LVP (PLUS II)-45 CF-R, PRECISION RACK AND
 Ad Id#: 16993
 Seller Ref.# 9815
 Model: 3015LVP
 Make: 4500 WATT MITSUBISHI
 Year: 2011 ( Used )
 Price: On Request
 Location: USA
Ad Status:CLOSED
Listed By:Jordan Craig Machinery
 Address: 
151 North Main Street Suite 203
10956 New City NY
USA
Phone: 845-398-0073
Fax: 845-398-0074
 Description: 
4500 WATT MITSUBISHI 3015LVP (PLUS II)-45 CF-R, PRECISION RACK AND
PINION, DIRECT DRIVE LASER
MFG:2011 - TOTAL HOURS: 11,400 - CUT HOURS: 3,944


Machine structure: Precision rack and pinion, direct drive

Travel drive method: X,Y, Z simultaneous 3 axes

Control method: X,Y, Z simultaneous 3 axis control

X-Axis stoke: 122.05"

Y-Axis stroke: 61.02"

Z-Axis Stroke: 3.54"

Maximum work piece size: 120.08" x 60.04"

Maximum processing feed rate: 1180 inches per minute

Maximum workpiece weight: 2050 lbs.

Table pass height: 33.5"

Rapid travel speed

Single axis: 3345 inches per minute

Simultaneous: 4730 inches per minute

Minimum command input: 0.001mm/.0001"

Drive motor type: intelligent AC servo

Machine unit dimensions: 418.5" L x 90.6" H x 183" W

Total system weight: 26,325 lbs.

Pallet change time: Approximately 25 seconds

Pallet changer weight: 4500 lbs.

Pallet changer drive mechanism: chain

Installation dimensions: 473.4" x 227.7"

Floor space requirement: 750 sq. ft.

Electrical requirements: 208 VAC ± 5%, 3 phase, 60 Hz

Motion system, CNC control: 71 KVA (Total machine usage)

Laser resonator: 202 (Full load Amps)


CNC controller specifications

Model: Mitsubishi LC20BP2

Type: Self contained-simple dust proof design (mounted on processing machine)

CPU: 64 Bit

Display unit: 10.4" TFT color LCD touch screen

Hard disc drive capacity: 2.0 GB

Program memory capacity, standard: 5000m/approximately 2 MB with 400 register
able programs

CO2 laser control

Power control: Output power, frequency duty

Operation control: Shutter open/close, beam on/off. Laser gas change, etc.

Processing machine control

Drive method: X,Y, Z (Simultaneous control)

Position detection: encoder

Minimum command unit: .001mm/.0001"

Program input method: 3.5" floppy, computer link, Ethernet LAN

Operation method: Memory operation, HD direct drive


Laser resonator specifications

Model: Mitsubishi 45CF-R

Excitation method: 3-axis cross flow, SD

Control method: power feedback

Power stability: ± 1 %

Beam mode: Low-order (main component TEM01)

Beam outer diameter: 1.02"

Beam divergence: Approximately 3.5" or less (total angle)

Wave length: 10.6 microns

Frequency setting range: 10~3000 Hz

Duty range: 0~100 % adjustable

Output power adjustable range: 0~100% of rating

Resonator unit dimensions: 98.4" long x 71.3" High x 31.5" wide

Resonator unit weight: 4850 lbs

Rated output power (CW): 4500 watts

Composition (CO2:CO:N2:He): 8:4:60:28

Consumption amount: 3 liters per hour

Gas sealing time: 24 hours during continuous oscillation
 


NOTE: Displayed on page 4500 WATT MITSUBISHI 3015LVP 4500 WATT MITSUBISHI 3015LVP (PLUS II)-45 CF-R, PRECISION RACK AND is listed under ID# 16993 by Jordan Craig Machinery in category Other Metalworking Machinery. For any additional info regarding this 4500 WATT MITSUBISHI 3015LVP please contact directly Jordan Craig Machinery.

© MACHINEKS.COM All Rights Reserved