[ ← GO TO AD ]

Blanchard 26HAD-48


Listed For Sale at MachineKs.com in category - Rotary Surface Grinders, Vertical Spindle.
 
[ TRANSLATOR ]
48Inch Chuck 100HP Spindle Blanchard 26HAD-48 ROTARY SURFACE GRINDER, ELECTRON
 Ad Id#: 15004
 Seller Ref.# 146420
 Model: 26HAD-48
 Make: Blanchard
 Year: 1988 ( Used )
 Price: $0.00
 Location: USA
Ad Status:CLOSED
Listed By:Machinery Values Inc.
 Address: 
401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501
 Description: 
48Inch BLANCHARD ROTARY SURFACE GRINDER
WITH InchGEARED HEADInch 100 H.P. SPINDLE

MODEL: #26-HAD48 S/N: 15803 NEW: 1988

CHUCK DIAMETER .................................... 48Inch
SWING INSIDE GUARDS ............................... 56Inch
VERTICAL RANGE UNDER NEW WHEEL .................... 24Inch
MAXIMUM LOAD ON CHUCK ....................... 3,000 LBS
GRINDING WHEEL DIAMETER ........................... 22Inch
GRINDING WHEEL SPEED .......................... 720 RPM
CHUCK SPEEDS (6) .......................... 6 TO 24 RPM
FEED SYSTEM:
RAPID TRAVERSE RATE .......................... 20Inch IPM
WHEELHEAD JOG RATE ........................ 0.100Inch IPM
COARSE FEED RATE ................. 0.001Inch TO .100Inch IPM
COARSE FEED MODE .................. CONTINUOUS/IMPULSE
FINE FEED RATE ................... 0.001Inch TO .010Inch IPM
COARSE TO FINE CHANGEOVER POINT ........... 0 TO .009Inch
SPARKOUT TIMER ..................... 0.1 TO 10 MINUTES

CATALOG DIMS.:
APPROXIMATE DIMENSIONS ........... 145InchL X Inch65W X 105InchH
APPROXIMATE WEIGHT ......................... 18,500 LBS

EQUIPPED WITH:
-AUTO-CYCLE CONTROL W/DIGITAL DISPLAY
-InchAInch SERIES MACHINE W/ALL ELECTRIC SERVO DRIVES
-HARDENED AND REPLACEABLE BASE WAYS
-100 H.P. InchGEARED HEADInch InchHIGH POWERInch
3/60/230-460 VOLT SPINDLE MOTOR
-24Inch VERTICAL CAPACITY
-48Inch ELECTRO-MAGNETIC CHUCK (3/8Inch CHUCK LIFE)
-INFINITELY VARIABLE HOLD NEUTROFIER CONTROL.
-26Inch DIAMETER SEGMENTED WHEEL (CORTLAND)
-DRY BASE WITH EXTERNAL COOLANT SYSTEM WITH PAPER
FILTRATION (InchDELPARKInch COOLANT SYSTEM). APPROX. DIMS.
ARE 43InchW x 94InchL x 48InchH. PAPER ROLL IS 36Inch WIDE.
COOLANT PUMP IS MADE BY InchWEGInch, 1.5 H.P. MOTOR.
-MACHINE IS PRESENTLY WIRED FOR 3/60/460 VOLTS

** EXCELLENT CONDITION **
** INSPECT UNDER POWER IN HARRISON, NJ **
 


NOTE: Displayed on page Blanchard 26HAD-48 48Inch Chuck 100HP Spindle Blanchard 26HAD-48 ROTARY SURFACE GRINDER, ELECTRON is listed under ID# 15004 by Machinery Values Inc. in category Rotary Surface Grinders, Vertical Spindle. For any additional info regarding this Blanchard 26HAD-48 please contact directly Machinery Values Inc..

© MACHINEKS.COM All Rights Reserved