|
Okamoto ACC24-60ST
Listed For Sale at MachineKs.com in category - CNC Surface Grinders. |
|
|
| |
|
| 24Inch Width 60Inch Length Okamoto ACC24-60ST SURFACE GRINDER, Fanuc 21G CNC, Pro |
| Ad Id#: | 14940 | | Seller Ref.# | 146232 | | Model: | ACC24-60ST | | Make: | Okamoto | | Year: | 1998 ( Used ) | | Price: | $0.00 | | Location: | USA |
| | Ad Status: | CLOSED | | Listed By: | Machinery Values Inc. | | Address: |
401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501
| |
|
| Description: |
24Inch x 60Inch OKAMOTO (MADE IN JAPAN) COLUMN TYPE SURFACE
GRINDER W/FANUC 21-G PROGRAMMABLE CONTROL
** ALL THREE AXES ARE DRIVEN BY SERVO MOTORS & BALLSCREWS **
MODEL: ACC2460ST S/N: 40005 NEW 1998
SPECIFICATIONS:
MAX GRINDING SURFACE ................. 24Inch X 61Inch
MAX CAPACITY UNDER 20Inch WHEEL ......... 23.6Inch
STANDARD CHUCK SIZE ................. 24Inch X 60Inch X 4.3Inch
MAX TABLE LOAD ....................... 3.300 LBS
LONGITUDINAL FEED:
MAX TRAVEL ........................... 65Inch
FEED RATE ............................ 6.6 - 82FT/MIN.
CROSSFEED:
MAX TRAVEL ........................... 26Inch
AUTO FEED TRAVEL ..................... 26Inch
RAPID FEED RATE ...................... 16.5 FT/MIN.
MANUAL FEED:
HAND FEED/REV(X1/X5/X20) ............. O.O1Inch/0.05Inch/0.2Inch
HAND WHEEL GRAD(X1/X5/X20) .......... 0.0001/0.0005Inch/0.002Inch
AUTO FEED:
ROUGH INFEED ......................... 0 - 0.0025Inch
FINE INFEED .......................... 0 - 0.0005Inch
FINE GRINDING ALLOWANCE .............. 0 - 0.002Inch
AIR-CUT FEED RATE(ROUGH/FINE) ........ 0 - 999,99999
NUMBER OF SPARK OUTS ................. 0 - 5
GRINDING WHEEL (D x W x B) ............ 20Inch X 3Inch X 8Inch
SPINDLE SPEED ......................... 1,100 RPM
MOTORS:
WHEEL SPINDLE ........................ 20 HP
HYD OIL PUMP FOR DRESSER ............. 0.5/2HP
VERT FEED(AC SERVO MOTOR) ............ 1.2 HP
CROSSFEED(AC SERVO MOTOR) ............ 1.2HP
FLOOR SPACE (W x D x H) ............... 253Inch X 128Inch X 99Inch
APPROXIMATE WEIGHT .................... 23,100 LBS.
EQUIPPED WITH:
FANUC 21-G MDI CONTROL
ALL THREE AXES ARE DRIVEN BY SERVO NOTORS & BALLSCREWS
RAPID APPROACH & RETRACT TO START POSITION
VERTICAL & CROSS MANUAL PULSE GENERATOR
RAPID FEED UP & DOWN
ROUGH & FINE GRINDING CYCLES
TRAVERSE,PLUNGE,SHIFT PLUNGE GRINDING CYCLES
BALL SCREWS ON ALL THREE AXES
23- 5/8Inch (500mm) x 59- 3/16Inch (800mm) InchOKAMOTOInch
ELECTRO MAG. CHUCK & CHUCK CONTROLLER
WHEEL BALANCING STAND & ARBOR
LARGE COOLANT SYSTEM WITH MAGNETIC SEPARATOR & PAPER FILTER
ALL AVAILABLE MANUALS
MACHINE IS PRESENTLY WIRED FOR 3/60/480 VOLTS
** EXCEPTIONAL, NEAR NEW CONDITION **
** USED IN A TOOLROOM BY A FORTUNE 500 COMPANY **
** INSPECT UNDER POWER IN OUR HARRISON, NJ WAREHOUSE ** |
|
|
NOTE: Displayed on page Okamoto ACC24-60ST 24Inch Width 60Inch Length Okamoto ACC24-60ST SURFACE GRINDER, Fanuc 21G CNC, Pro is listed under ID# 14940 by Machinery Values Inc. in category CNC Surface Grinders. For any additional info regarding this Okamoto ACC24-60ST please contact directly Machinery Values Inc..
|
© MACHINEKS.COM All Rights Reserved
|