[ ← GO TO AD ]

K.O. Lee B6060 Dakota


Listed For Sale at MachineKs.com in category - Tool & Cutter Grinders.
 
[ TRANSLATOR ]
K.O. Lee B6060 Dakota TOOL & CUTTER GRINDER, InchDAKOTAInch SERIES, TILT WHEELHEA
 Ad Id#: 14886
 Seller Ref.# 146048
 Model: B6060 Dakota
 Make: K.O. Lee
 Year: 1998 ( Used )
 Price: $0.00
 Location: USA
Ad Status:CLOSED
Listed By:Machinery Values Inc.
 Address: 
401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501
 Description: 
K.O. LEE InchDAKOTAInch SERIES (WHEELHEAD TILTS & SWIVELS)
UNIVERSAL TOOL & CUTTER GRINDER

MODEL: B6060 S/N: 27955 NEW: 1998

SWING OVER TABLE ........................... 12-1/4Inch
DISTANCE BETWEEN TAILSTOCKS ..................... 32Inch
TABLE WORKING SURFACE .............. 5-1/4Inch X 37-1/4Inch
SUB TABLE .................................. 8Inch X 48Inch
LONGITUDINAL TABLE TRAVERSE ..................... 20Inch
TABLE FEED PER REV. OF HANDWHEEL:
FAST ....................................... 2-13/16Inch
SLOW .......................................... 9/16Inch
CROSS FEED ....................................... 8Inch
FEED PER REV. OF HANDWHEEL (.001Inch GRAD.) ,,... 0.100Inch
VERTICAL MOVEMENT OF COLUMN ................. 10-1/2Inch
FEED PER REV. OF HANDWHEEL (.001Inch GRAD.)...... 0.050Inch
COLUMN DIAMETER .................................. 6Inch
MINIMUM/MAXIMUM DISTANCE CENTERLINE OF WHEEL
SHAFT TO TABLE ......................5-3/8Inch / 15-1/4Inch
MAXIMUM DISTANCE FROM COLUMN TO OUTSIDE
OF STRAIGHT WHEEL: DOVETAIL SLIDE NOT EXTENDED,
SPINDLE 90 DEG. TO TABLE .................... 4-5/8Inch
MAXIMUM DISTANCE FROM COLUMN TO OUTSIDE
OF STRAIGHT WHEEL: DOVETAIL SLIDE EXTENDED,
SPINDLE 90 DEGREES TO TABLE ................. 9-1/4Inch
TABLE SWIVELS (CALIBRATION: 3Inch PER FT.,
15 DEG. EITHER SIDE OF CENTER) .......... 225 DEGREES
WHEEL HEAD SWIVEL ........................ 360 DEGREES
MAXIMUM I.D. DEPTH, HOLE SIZE 9/32Inch TO 2Inch ..... 1-1/4Inch
MAXIMUM CROSS FEED SURFACE GRINDING W/8Inch WHEEL..... 3Inch
SPINDLE SPEED RANGE ................. 3450 TO 17250 RPM

APPROXIMATE MACHINE WEIGHT ................. 1,300 LBS

EQUIPPED WITH:
InchDAKOTAInch SERIES #B6055 UNIVERSAL GRINDING WHEELHEAD
FEATURES:
- SWIVELLING & TILTING (22 DEG. EITHER SIDE
OF VERTICAL)
- 1 HP MOTOR WIRED FOR 3/60/460 VOLT OPERATION
- 3/4Inch TO 6Inch DIAMETER WHEELS (O.D. GRINDING)
BIJUR LUBRICATOR (ONE-SHOT)
K.O. LEE #982-5C AIR BEARING FIXTURE
SET OF TAILSTOCKS
CENTER SETTING GAGE
UNIVERSAL GAGE


** EXCEPTIONAL APPEARANCE (ORIGINAL PAINT) **
** INSPECT UNDER POWER IN OUR HARRISON, NJ WAREHOUSE **
 


NOTE: Displayed on page K.O. Lee B6060 Dakota K.O. Lee B6060 Dakota TOOL & CUTTER GRINDER, InchDAKOTAInch SERIES, TILT WHEELHEA is listed under ID# 14886 by Machinery Values Inc. in category Tool & Cutter Grinders. For any additional info regarding this K.O. Lee B6060 Dakota please contact directly Machinery Values Inc..

© MACHINEKS.COM All Rights Reserved