[ ← GO TO AD ]

Landis 1R


Listed For Sale at MachineKs.com in category - Universal Cylindrical Grinders.
 
[ TRANSLATOR ]
10Inch Swing 20Inch Centers Landis 1R OD GRINDER, I.D., HYD. TABLE, AUTO INFEED,
 Ad Id#: 14863
 Seller Ref.# 145981
 Model: 1R
 Make: Landis
 Year: 1984 ( Used )
 Price: $0.00
 Location: USA
Ad Status:CLOSED
Listed By:Machinery Values Inc.
 Address: 
401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501
 Description: 
10Inch X 20Inch LANDIS (MADE IN USA) InchHIGH-PRECISIONInch
UNIVERSAL I.D./O.D. CYLINDRICAL GRINDER

MODEL: 1R S/N: T884-70 NEW: 1985

NOMINAL SWING OVER TABLE .......................... 10Inch
MAXIMUM SWING OVER TABLE ...................... 10-7/8Inch
NOMINAL DISTANCE BETWEEN CENTERS .................. 20Inch
HYDRAULIC TABLE TRAVERSE ............... 2Inch TO 240Inch IPM
TRAVERSE PER TURN OF HANDWHEEL ................. 0.200Inch
TRAVERSE HANDWHEEL GRADUATIONS ................. 0.001Inch
SWIVEL TABLE GRADUATED ........ 20 DEGREES, 4Inch PER FOOT

WHEELHEAD:
WHEELHEAD SWIVELS LEFT & RIGHT OF CENTER ...... 90 DEG.
WHEEL SIZE .............................. 12Inch DIAMETER
MAXIMUM WIDTH, FULL WHEEL ......................... 3Inch
MAXIMUM HYDRAULIC INFEED - ON DIAMETER ........ 0.090Inch
RAPID INFEED STROKE ............................... 1Inch
MINIMUM FEED GRADUATIONS - ON DIAMETER ..... 0.000050Inch
WORK DIAMETER REDUCTION PER REVOLUTION OF
HANDWHEEL ..................................... 0.100Inch
WORK DIAMETER REDUCTION PER REVOLUTION OF
FINE FEED KNOB ............................... 0.001Inch
WHEELHEAD MOTOR ................................ 5 HP

WORKHEAD:
WORKHEAD SWIVELS TOWARD WHEELHEAD ........ 90 DEGREES
WORKHEAD SWIVELS AWAY FROM WHEELHEAD ..... 30 DEGREES
WORKHEAD SPINDLE SPEEDS (6) ........... 60 TO 600 RPM
WORKHEAD SPINDLE NOSE ......................... A2-5Inch
WORKHEAD MOTOR ............................... 1/4 HP

APPROXIMATE WEIGHT .......................... 4,150 LBS
APPROXIMATE DIMENSIONS ............. 8L X 4W X 66InchHT

EQUIPPED WITH:
SWING DOWN INTERNAL GRINDING ATTACHMENT WITH I.D. SPINDLE
UNIVERSAL WHEELHEAD AND UNIVERSAL WORKHEAD
12Inch x 3InchWIDTH x 5InchBORE GRINDING WHEEL
HYDRAULIC TABLE TRAVERSE
AUTO INFEED @ TABLE REVERSALS
AUTO PLUNGE FEED
POWER RAPID WHEELHEAD ADVANCE & RETRACTION
SPARKOUT TIMER
DUAL LIVE/DEAD SPINDLE HEADSTOCK
HARD FILM MICROSHERE WHEEL SPINDLE BEARINGS
COOLANT SYSTEM
CARRIAGE AND WHEELHEAD WAYS ARE AUTOMATICALLY
LUBRICATED
MACHINE MOTORS ARE WIRED FOR 3/60/220-440 VOLT OPERATION

* * EXCELLENT CONDITION & APPEARANCE * *
** INSPECT UNDER POWER IN OUR HARRISON, N.J. WAREHOUSE **
 


NOTE: Displayed on page Landis 1R 10Inch Swing 20Inch Centers Landis 1R OD GRINDER, I.D., HYD. TABLE, AUTO INFEED, is listed under ID# 14863 by Machinery Values Inc. in category Universal Cylindrical Grinders. For any additional info regarding this Landis 1R please contact directly Machinery Values Inc..

© MACHINEKS.COM All Rights Reserved