[ ← GO TO AD ]

Cincinnati-Milacron DH


Listed For Sale at MachineKs.com in category - Universal Cylindrical Grinders.
 
[ TRANSLATOR ]
10Inch Swing 24Inch Centers Cincinnati-Milacron DH OD GRINDER, HYD. TABLE, AUTO I
 Ad Id#: 14405
 Seller Ref.# 141914
 Model: DH
 Make: Cincinnati-Milacron
 Year: 1969 ( Used )
 Price: $0.00
 Location: USA
Ad Status:CLOSED
Listed By:Machinery Values Inc.
 Address: 
401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501
 Description: 
10Inch X 24Inch CINCINNATI (MADE IN USA) InchPRECISIONInch
UNIVERSAL CYLINDRICAL GRINDER

MODEL: DH S/N: 35252B5V-0023 NEW: 1969

CAPACITY:
MAXIMUM SWING OVER TABLE .................. 10-15/16Inch
NOMINAL DISTANCE BETWEEN CENTERS ........... 24Inch

SWIVEL TABLE GRAD. TO AN ANGLE OF:
TOWARD WHEELHEAD .......................... 8 DEG.
AWAY FROM WHEELHEAD ....................... 3 DEG.
SWIVEL TABLE GRAD. TAPER PER FT.:
TOWARD WHEELHEAD .......................... 3- 1/2Inch
AWAY FROM WHEELHEAD ....................... 2Inch

GRINDING WHEELHEAD:
GRINDING WHEEL .............. 12Inch DIA. X 1Inch X 5Inch HOLE
GRINDING WHEEL SPINDLE SPEED (12Inch DIA.)..... 2060 RPM
WORN WHEEL (10Inch DIA.) ...................... 2480 RPM


SWIVEL RANGE:
LOWER SWIVEL, RIGHT AND LEFT (APPROX.)....... 110 DEG.
UPPER SWIVEL, RIGHT (APPROXIMATELY) ......... 90 DEG.
UPPER SWIVEL, LEFT (APPROXIMATELY) .......... 30 DEG.


TABLE TRAVERSE:
RANGE OF TABLE TRAVERSE GRINDING RATES ..... 3Inch TO 220Inch
TABLE TARRY ADJUSTMENT - INFINITE .......... 0 - 5 SEC.
HAND TABLE TRAVERSE - RATE PER REVOLUTION
OF HAND WHEEL (RAPID)....................... 1Inch
(SLOW) ...................... 1/10Inch

HEADSTOCK AND FOOTSTOCK:
HEADSTOCK AND FOOTSTOCK CENTER TAPER .... NO. 7 JARNO
WORKHEAD SPINDLE SPEED RANGE ............ 50 - 600 RPM
HEADSTOCK SWIVEL RANGE:
TOWARD WHEEL HEAD ........................... 90 DEG.
AWAY FROM WHEEL HEAD ........................ 30 DEG.

INFEED ADJUSTMENTS:
DIA. REDUCTION PER REV. OF INFEED HANDWHEEL ... 0.100Inch
MINIMUM INFEED INCREMENT IN TERMS OF DIAMETER
REDUCTION ............................... 0.000010Inch
AUTOMATIC INFEED AT TABLE REVERSAL
(DIAMETER REDUCTION) ................ 0.0002Inch MINIMUM
0.004Inch MAXIMUM
TOTAL ADJUSTMENT OF WHEEL HEAD BY HAND ....... 5-1/2Inch

POWER REQUIREMENTS:
WHEEL HEAD MOTOR ............................... 2 HP
HEADSTOCK MOTOR .............................. 3/4 HP
HYDRAULIC PUMP MOTOR ......................... 3/4 HP
COOLANT PUMP MOTOR ........................... 1/4 HP

APPROX. MACHINE WEIGHT ............. ......... 6,900 LBS

EQUIPPED WITH:
HYDRAULIC TABLE TRAVERSE
InchAUTOMATIC HYDRAULIC INFEEDInch OPTION PROVIDING:
-AUTOMATIC INFEED
-ADJUSTABLE LEFT & RIGHT TABLE TARRY
-POWER RAPID WHEELHEAD POSITIONING BY LEVER

InchFILAMATICInch HYDRASTATIC WHEELHEAD BEARINGS
DUAL LIVE/DEAD WORKHEAD SPINDLE
SWIVEL TABLE GRADUATED IN DEGREES & TAPER PER FOOT
COOLANT SYSTEM
EXTERNAL HYDRAULIC SYSTEM
ELECTRICAL CABINET MOUNTED ABOVE HDRAULIC SYSTEM
3/60/220-440 VOLT MOTORS

** INSPECT UNDER POWER IN OUR HARRISON, NJ WAREHOUSE **
** EXCELLENT CONDITION & APPEARANCE **
 


NOTE: Displayed on page Cincinnati-Milacron DH 10Inch Swing 24Inch Centers Cincinnati-Milacron DH OD GRINDER, HYD. TABLE, AUTO I is listed under ID# 14405 by Machinery Values Inc. in category Universal Cylindrical Grinders. For any additional info regarding this Cincinnati-Milacron DH please contact directly Machinery Values Inc..

© MACHINEKS.COM All Rights Reserved