|
HARDINGE DV-59
Listed For Sale at MachineKs.com in category - Precision Lathes. |
|
|
| |
|
| 9" Swing 18" Centers Hardinge DV-59 PRECISION ENGINE LATHE, Toolmaker's Compound & Tailstock, Ass't 5C Collets |
| Ad Id#: | 11019 | | Seller Ref.# | 143185 | | Model: | DV-59 | | Make: | HARDINGE | | Year: | 1984 ( Used ) | | Price: | $6,500.00 | | Location: | USA |
| | Ad Status: | CLOSED | | Listed By: | Machinery Values Inc. | | Address: |
401 Supor Blvd.
Harrison NJ 07029
USA
Phone: 973-497-7505
Fax: 973-497-7501
| |
|
 |
| Description: |
HARDINGE SUPER PRECISION FIRST OPERATION LATHE
MODEL: DV-59 S/N: DV-59-17931 NEW: 1984
SPECIFICATIONS:
SPINDLE CAP. w/ROUND 5C COLLETS ...... 1-1/16"
HEXAGON 5C COLLETS .... 7/8"
SQUARE 5C COLLETS ..... 3/4"
STEP CHUCKS ........... 1-1/16" TO 6"
JAW CHUCKS ............ 5"
JAW CHUCKS THROUGH SPINDLE 1-5/32"
SPINDLE TAPER ........................ HARDINGE
SWING OVER BED ....................... 9"
DISTANCE BETWEEN CENTERS ............. 17"
TRAVEL OF TOP SLIDE .................. 4-1/4"
TRAVEL OF BOTTOM SLIDE ............... 5"
TRAVEL OF TAILSTOCK SPINDLE .......... 3-1/2"
TAILSTOCK SPINDLE TAPER .............. #3MT
VARIABLE SPINDLE SPEED RANGE ......... 230 TO 3500 RPM
APPROX. WEIGHT ....................... 1,150 LBS.
EQUIPPED WITH:
-HARDINGE COMPOUND & TAILSTOCK
-PUSH BUTTON CONTROL FOR VARIABLE SPEED
-BALL BEARING LEVER TYPE 5C COLLET CLOSER
-ASSORTED 5C COLLETS (SEE PHOTOS)
-3/60/230 VOLT TWO-SPEED DRIVE MOTOR & ELECTRICAL CONTROLS
INSPECT UNDER POWER IN OUR NEW JERSEY WAREHOUSE.
EXCELLENT CONDITION -
TOTALLY GONE THRU, RECONDITIONED AND TESTED IN OUR SHOP |
|
|
NOTE: Displayed on page HARDINGE DV-59 9" Swing 18" Centers Hardinge DV-59 PRECISION ENGINE LATHE, Toolmaker's Compound & Tailstock, Ass't 5C Collets is listed under ID# 11019 by Machinery Values Inc. in category Precision Lathes. For any additional info regarding this HARDINGE DV-59 please contact directly Machinery Values Inc..
|
© MACHINEKS.COM All Rights Reserved
|
